Ink Cartridge Safety
Ink Cartridge Safety
• Keep ink cartridges out of the reach of children and do not drink the ink.
• Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water.
• Do not put your hand inside the WorkForce 610 Series or touch any cartridges during printing.
• Install a new ink cartridge immediately after removing an expended one. Leaving cartridges uninstalled can dry out the print head and may prevent the WorkForce 610 Series from printing.
• If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the WorkForce 610 Series. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area.
Cleaning
To keep the WorkForce 610 Series working at its best, you should clean it several times a year.
Caution:
Do not use a hard brush, benzine, alcohol, or paint thinner to clean the WorkForce 610 Series or you may damage it. Do not use oil or other lubricants inside the WorkForce 610 Series or let water get inside it.
1. Turn off the WorkForce 610 Series.
2. Unplug the power cable.
3. Disconnect the USB cable.
4. Remove all the paper.
5. Clean the scanner glass with