Computer Network Topologies
Essay title: Computer Network Topologies
Computer network topologies can be categorized in the following categories.
• bus
• star
• ring
• mesh
• Tree.
Hybrid networks are the complex networks, which can be built of two or more above mentioned topologies.
Bus Topology
Bus topology uses a common backbone to connect all the network devices in a network in a linear shape. A single cable functions as the shared communication medium for all the devices attached with this cable with an interface connector. The device, which wants to communicate send the broadcast message to all the devices attached with the shared cable but only the intended recipient actually accepts and process that message.

Ethernet bus topologies are easy to install and don’t require much cabling and only a main shared cable is used for network communication. 10Base-2 and 10BaseT are two popular types of the Ethernet cables used in the Bus topology. Also, Bus network works with very limited devices. Performance issues are likely to occur in the Bus topology if more than 12-15 computers are added in a Bus Network. Additionally, if the Backbone cable fails then all network becomes useless and no communication fails among all the computers. Unlike in the Star topology in which if one computer is detached from a network then there is not effect on the other computers in a network.

Ring Topology
In ring Network, every computer or devices has two adjacent neighbors for communication. In a ring network, all the communication messages travel in the same directory whether clockwise or anti clockwise. Any damage of the cable of any cable or device can result in the breakdown of the whole network. Ring topology now has become almost obsolete.

FDDI, SONET or Token Ring Technology can be used to implement Ring Technology. Ring topologies can be found in office, school or small buildings.
Star Topology
In the computer networking world the most commonly used topology in LAN is the star topology. Star topologies can be implemented in home, offices or even in a building. All the computers in the star topologies are connected to central devices like hub, switch or router. The functionality of all these devices is different. I have covered the detail of each networking devices in the separate portion of my website. Computers in a network are usually connected with the hub, switch or router with the Unshielded Twisted Pair (UTP) or Shielded Twisted Pair Cables.

As compared to the bus topology, a star network requires more devices & cables to complete anetwork. The failure of each node or cable in a star network, won’t take down the entire network

as compared

Get Your Essay

Cite this page

Hybrid Networks And Network Devices. (July 1, 2021). Retrieved from https://www.freeessays.education/hybrid-networks-and-network-devices-essay/