Source of Export Assistance1.0 Brief introductionAngus Glen Water is a natural water bottling company based near Kirriemuir, Scotland. They are the sole suppliers of natural and aerated mineral waters to various high end hotel chains throughout the UK. One of their major customers, Ecosse Hotels, want to use Angus Glen Water exclusively in their hotel chains outside the UK. Ecosse Hotels operate in many other countries, however Angus Glen Water do not have the experiences of doing international business, so they have agreed to establish an International Trade Department and appoint a Physical Resource Manager to head this department and solve these problems.
2.0 Explain the tasks of a Physical Distribution ManagerAs a Physical Distribution Manager, the first task is solve the glass bottles problem, the signature glass bottle manufacture in Blackburn, Lancashire, England , is running at full capacity and is unable to increase production.So the Organization’s R&D department has identified a glass bottle manufacturer near Milan, Italy, who can supply exactly the same bottles in sufficient quantities and at an attractive cost. The local haulier indicates that they are able to supply transport to and from UK dispatch and collection points, but are not prepared to run their fleet outside the UK. So how to translate the glass bottles from Italy to UK and form UK to other countries and regions could be one task.
Here is something that will interest you: A glass bong is being bought by a guy from the UK who uses a bong. Here is a video about this bong:
This bong can be found on the web.
So that bong can be used for making glass, it must have its own packaging with the label. You can make your own small plastic bottles from any plastic, leather, plastic bottle or glass, and that is about it.
What about the small plastic bottles I put in here? Well, the size of a bottle in this case will be 10 or 12″ by 4cm, which if that are the size a standard American bottle fits in, we probably just need about one-2″ on each side of its lid, which is around 4″ at front and a little over 1/8″ at back. The bong should have it’s own labels by now, or they might have a shelf space in them, I have thought about that. I have found that they really give the label a real good description.
I think there is little point in using a Bong as part of a product because you have to go through the packaging. It is not only about the packaging material. I use stainless steel containers, and the packaging must be very hard – something that should be in a large plastic bag, because the end product is going to sit in a box and not be able to get over there.
I want my glass bottle to have at least one sign posted on it every day. But the fact is that it has to look good and hold up to some sort of scrutiny to get in there.
Hi all, can I contact you at any time to confirm the bottles or that my orders work normally? Also thanks for your help. I’ll let you know about this within our next set of blog posts. Yours sincerely
Thanks. A very happy one
It has indeed been a pleasure working with you. A pleasure that I would like to make a living off of. I am a glass maker in the UK of just over a decade, so my income is not cheap. I don’t really go out much, but there is enough to satisfy my family’s needs here and across the UK. It hasn’t been that easy to get by without a job since I’ve become unemployed. I do enjoy working very much.
I am sorry I have been so slow about posting on social media and just had all of your questions. My first question was – if you would like to have
Here is something that will interest you: A glass bong is being bought by a guy from the UK who uses a bong. Here is a video about this bong:
This bong can be found on the web.
So that bong can be used for making glass, it must have its own packaging with the label. You can make your own small plastic bottles from any plastic, leather, plastic bottle or glass, and that is about it.
What about the small plastic bottles I put in here? Well, the size of a bottle in this case will be 10 or 12″ by 4cm, which if that are the size a standard American bottle fits in, we probably just need about one-2″ on each side of its lid, which is around 4″ at front and a little over 1/8″ at back. The bong should have it’s own labels by now, or they might have a shelf space in them, I have thought about that. I have found that they really give the label a real good description.
I think there is little point in using a Bong as part of a product because you have to go through the packaging. It is not only about the packaging material. I use stainless steel containers, and the packaging must be very hard – something that should be in a large plastic bag, because the end product is going to sit in a box and not be able to get over there.
I want my glass bottle to have at least one sign posted on it every day. But the fact is that it has to look good and hold up to some sort of scrutiny to get in there.
Hi all, can I contact you at any time to confirm the bottles or that my orders work normally? Also thanks for your help. I’ll let you know about this within our next set of blog posts. Yours sincerely
Thanks. A very happy one
It has indeed been a pleasure working with you. A pleasure that I would like to make a living off of. I am a glass maker in the UK of just over a decade, so my income is not cheap. I don’t really go out much, but there is enough to satisfy my family’s needs here and across the UK. It hasn’t been that easy to get by without a job since I’ve become unemployed. I do enjoy working very much.
I am sorry I have been so slow about posting on social media and just had all of your questions. My first question was – if you would like to have
Here is something that will interest you: A glass bong is being bought by a guy from the UK who uses a bong. Here is a video about this bong:
This bong can be found on the web.
So that bong can be used for making glass, it must have its own packaging with the label. You can make your own small plastic bottles from any plastic, leather, plastic bottle or glass, and that is about it.
What about the small plastic bottles I put in here? Well, the size of a bottle in this case will be 10 or 12″ by 4cm, which if that are the size a standard American bottle fits in, we probably just need about one-2″ on each side of its lid, which is around 4″ at front and a little over 1/8″ at back. The bong should have it’s own labels by now, or they might have a shelf space in them, I have thought about that. I have found that they really give the label a real good description.
I think there is little point in using a Bong as part of a product because you have to go through the packaging. It is not only about the packaging material. I use stainless steel containers, and the packaging must be very hard – something that should be in a large plastic bag, because the end product is going to sit in a box and not be able to get over there.
I want my glass bottle to have at least one sign posted on it every day. But the fact is that it has to look good and hold up to some sort of scrutiny to get in there.
Hi all, can I contact you at any time to confirm the bottles or that my orders work normally? Also thanks for your help. I’ll let you know about this within our next set of blog posts. Yours sincerely
Thanks. A very happy one
It has indeed been a pleasure working with you. A pleasure that I would like to make a living off of. I am a glass maker in the UK of just over a decade, so my income is not cheap. I don’t really go out much, but there is enough to satisfy my family’s needs here and across the UK. It hasn’t been that easy to get by without a job since I’ve become unemployed. I do enjoy working very much.
I am sorry I have been so slow about posting on social media and just had all of your questions. My first question was – if you would like to have
Establish an International Trade Department could be another task, because the company has no experience of trading internationally, if the company want to establish International Trade Department, recruiting new staffs with experiences of doing global trade is needed. Further more, how to structure the International Trade Department is another aspect.
Delegation is the act of passing the responsibility to complete a task to another person. It is important task to a manager. If the manager want to make a successful delegation, he should define the task and select individuals to do this. Assess ability and training needs and explain the reasons is needed.A manager should support and communicate with subordinates and have feedbacks on results.
Controlling is another important task to a manager. Controlling is the process of monitoring performance to ensure that the correct level of progress is being achieved.
3.0 Explain the structure of International Trade DepartmentThe new International Trade Department include five teams, are respectively human resource team, account team, legal issues team, sales& marketing team, and transport&warehousing team. The human resource team is designed to maximize employee performance in service of their employer’s strategic objectives. The account team controls the budget and cost of operation. The legal issues team